โ›ต๏ธWe are so Excited!!! ๐ŸŽ‰We are finally done installing our sailboat’s hatches!!! ๐Ÿ˜#115
Articles, Blog

โ›ต๏ธWe are so Excited!!! ๐ŸŽ‰We are finally done installing our sailboat’s hatches!!! ๐Ÿ˜#115

January 14, 2020


Third day of work. We couldn’t finish it last night because it was too dark. And now it’s time to finish it. Hopefully. I’m Roberta. And I’m Duca. And for the past year we have been building our own tiny shipping container house. Made possible by our Patrons (Thank you!!) So we can travel around knowing that we will always have this little place that we can call home. But guess what? We’ve just found our dream project before we expected: this abandoned sailboat. So, we are gonna stop building the house for a couple months to bring our boat back to life, and then we’re gonna go back and finish the
house. New episode every Monday!! Cleaning the dust. We’ve been away from the boat for like 5 days, maybe 7 days and the dust of other boats is just
amazing. Check it out. That’s the problem when you are in a working marina. Working marina is just… people are working all around. You need to clean the boat. That’s it. So it’s time for some cleaning. That’s it. Yeah. Now that we cleaned the deck it’s about time to? Install the hatches. Or portlights, I’m not sure. This is a portlight… Portholes? Yeah, the side ones that open. And then after that we’re gonna start
installing the hatches itself. We are anxious to see the boat with 100% of the hatches installed. But as we have 12 to do we’re gonna do it in turns. First we’re gonna start with this one. And for that we still need to sand a
little bit here, apply the… But before that we need to show them how we installed the acrylic on the top of this. We can not skip steps. That’s true. Because right now the hatches are ready to be installed but we didn’t show you how we installed the acrylic. (Yes, we showed it last week – you can see it here) That’s a lot of work. So let’s start with the acrylic and then we’re gonna come to the installation of the hatches. Contact glue We need to wait 15 minutes for this (to dry). So meanwhile we are putting some tapes on the windows (hatches). Is it hard, babe? Up side down is tricky sometimes. So we are preparing the portholes for the primer. Yeah… we are preparing it to install the… To paint the primer so we can install it with
the Sikaflex. Because Sikaflex with primer works so much better. So, we want to have primer. You got the point, right? It’s gonna take a while until we finish this. I’m doing this and Duca is doing that one. Primer time. Everything we do we have primer
in between. That’s just the way it is. But this was expensive but we are using
for a while already and we still have a lot. That’s pretty good at least. Let’s do this. Now is the tricky moment. If we can do these ones, the side ones, we can do the rest. These ones are the
tricky ones. But we’re gonna manage to do them. We are installing our third porthole. We are learning. It’s actually a good result. Excited. It’s actually easier to install
than the portlights. Yeah. Because we can communicate. That’s true. The sunset. We still have one to install and that’s it for today. Because the sun is going out and then
it’s really hard to install this. So, this is the last one. Almost done for today. Yep. This is really cool. Check it out. You can see the sunset. The view… The view is not the best one yet, there is just a motorboat next to us that be sitting here for a long time. But, in the future hopefully we’re gonna have some water, clean water here, sunset right on the ocean. Dream is for free still. Yeah. Let’s keep going. Stop dreaming and keep working. Second day of installation of hatches. Yes. Almost done with this job. It’s simple but it’s long… it takes so long to get all the holes right. We’re just making sure we have the right screw (screw thread) I mean, the right… you got the point. Because the paint is really really thick, so… We need to be really really careful. Meanwhile… I’m organizing these things to glue the rubber. Hello. Hello. Second part. Third day of work. We couldn’t finish it last night because it was too dark. And now it’s time to finish it. Hopefully. Yesterday it started to
get really dark. And black Sikaflex in a white deck with white hatches during the night… it’s not a good idea. And mosquitoes. And mosquitoes, yeah. So, now we need to clean the mess. Now that it’s dried. So, we need to clean this. I can use it like this for now. So yesterday… This is the result. done during the night. We are pretty excited with the result actually. It’s not bad. That’s the mess. We are still cleaning it. But, at least it’s in place. So far we did 4, right? (Actually 4+4=8) We hope we don’t have any leaks. Yeah, hopefully we don’t have any leaks,
because I don’t want to do this again anytime soon. Check this out. We have this one… And we have this one, this one, this one, and this one. And we still have another
3 to go, not 2. The huge one, another one of the big ones, and another huge one. The entry door. Yeah, that’s the entry door. So far
excited? Yeah. I’m really… I think I’m clean now. Taking this off. It’s terrible. It’s like a challenge… to install white hatches in a white deck with black Sikaflex. Why we are not using the white Sikaflex? We don’t really like the white because
it’s always… it always gets dirty and yellow and with like a lot of… Like this one. It’s a bad job. Don’t show them, babe. This is a bad job, it doesn’t look good because we have a cover on the top of that,
so we didn’t care about it in. By that time we didn’t know how to use soap. Yeah, we didn’t use enough soap to smooth the Sikaflex. But these ones are getting good, so far so good. I mean, it’s not perfect, it’s just impossible to do it perfect because we have no experience with that. But at least we don’t believe
it’s gonna leak. And that’s… You are dirty here. Yeah, it’s time to go for lunch. Hatch of the day. The huge one. Actually, this one went easier than we
thought. We just forgot to record it. It went smooth in place. Taking off that I almost killed myself. We were trying this in place and we were walking… I mean I was walking with this huge one by myself through that hatch. And it was
covered with one of those papers, and I stepped right in the middle. And I just twisted my ankle. And your arm? But it’s all good. I almost got seriously hurt, but it’s all good. The first bad thing that has happened here. The first job accident. Labor accident. Yeah, the first real one. I hope it’s the last one. So, we still need to put this one in
place, and the entry door. And then we’re gonna be done with this. Why we are not using polycarbonate? That’s a good question. I think this one scratches… it’s harder to scratch. I mean, if it scratch you can still polish it
and get scratch out. And it’s cheaper, it’s 5 times cheaper than… Yeah, other than the price… I don’t remember to be honest, it was 5 months ago that we decided it. But I remember that in between all the goods and bads we preferred acrylic. I just don’t remember the reasons. I think it was price. And I think it was the possibility of polishing it. You are tired. So, why did we paint the hatches with spray gun
instead of powder coating? Because if we wanted to powder coat we couldn’t anodize. And at first we thought we were just gonna anodize, not paint at all, just anodize it. And if you anodize you need to choose in between powder coating or anodizing and we prefer anodization. We thought we’d prefer anodization. But now that we didn’t like the anodization we paint on the top of it and then if we paint on the top of it we would we would lose a 100% percent of the galvanization, I mean the anodization. if we powder coat it. Because they need to give a
bath of chemicals. So in this way we painted it but we didn’t lose 100% of the anodization. And also we filled the little holes that we had. Yeah, that’s true. Any other question? Just leave the comment below. Finally, we installed all the hatches in place. But now we need to install these little things. And also we need to install this and all the finishings. We have a few finishings to do. But still, it’s a really good
accomplishment. Now it’s about time to clean this little thing that goes on their hatches. So we need to take this apart of this. And to use kerosene, stainless steel cleaning some brushes. So, let’s get started. And now the final piece. So, what is this for? This is basically for ventilation of the boat. So, the air comes inside from here. And the water just stays here. It’s gonna just leak from here. Hopefully the water won’t do this way. But supposedly this is gonna let air in but not water in. And that’s a really good thing. If there’s a big wave I think the water ca go inside, because there is a thing that we can lock it, block… There’s… you can see this screw here… with this screw we can put a lid, a plug. We can put a plug underneath, so if we are in a really really bad weather, that we have waves crashing all the time on the deck, we just closed it to make sure no water goes in. But in a regular situation this is a way of closing the boat, but at the same time letting the air to be exchanged with the outside. It’s time for some water. Finally, we’ve been waiting to put some
water on the deck for a long long time and now we finally have hatches. So we can clean the deck. And today’s the perfect day because it… today… It’s so hot. It’s hard to talk even. The sensation today is 47 degrees Celsius (117F), the weather sensation. As you can tell. The real temperature must be like 38 or 37C (100F). Around that. Perfect day for some water. So we’re gonna do some washing and then we’re gonna show you the result of the hatches. That’s just a sneak peek. Let’s do it. I cannot work with water today. Because… That means I’m just filming today. And someone else is working. So what do you guys think? It’s pretty good. The deck slowly is getting in shape. We have almost everything we need on the deck
already. But there is something… I don’t know if you noticed it. There’s a few things missing that we took off the deck. But that’s for future episode. A tip: they are made out of stainless steel. You told them almost everything. It’s just a tip. There are a lot of stainless steel missing on the deck. And that’s for a reason, because we’re… We’re gonna talk about that in a future episode because we didn’t finish it yet. But so far… check it out. We have even lids. That’s pretty good. So, we have all the hatches done, all the lids of lockers done. What else? We just need to put the
door in place. The entry door, yeah. We didn’t put the entry door in place because we are working on inside and it’s a really really dirty job. The tank. Don’t tell
anyone. We’re working on the tank (Diesel tank). So we don’t want to have the entry door in place so we don’t get the entry door dirt. So right now it’s off but it’s ready to be installed. But that’s it for
this week. It was a long week because it’s been hard to work this way. Poor, babe. Took a while for me to go to the doctor because I thought it was gonna get better on its on. But it was just swelling, swelling, swelling and then I went to the doctor this week and he said… The good thing is that it’s not broken. We took an x-ray, it’s not broken. But, in order to the swelling to… In order to heal… In order to heal he told me to use this for 2 weeks. And that’s gonna be a painful 2 weeks
because it’s really hard to walk on the deck like… How is “esquilo em Inglês”? Squirrel. Our squirrel is… She say that I’m a little squirrel, that just keep walking
everywhere and now the squirrel needs to sit down and that’s not that easy. But for this week that’s it because we’re just rambling and talking too much as usual. But we are really happy with all the
hatches in place and now we can wash the deck. And it look really good,
even the air exchange thing. The ventilation. It
looks really good. We like it and we like the color of the acrylics and it’s just… I don’t know… We are in love. It seems like the boat is getting ready and that’s pretty good. But now we need to welcome
on board our new Patreons for this week. So, welcome on board, Kyle, Gerard, Tracey, Matthew, Will, Titus, Craig, Stephane, Mark, Michael, Alexander, Emannuel, Antony. And we also want to thank the donations through our PayPal. Thanks a lot Michael, John, Cora and Michael. Guys, thanks so so much. We really really
appreciate your support. And we see you guys next week. We’ll see you guys next Monday. Join the crew

100 Comments

  • Reply Joseph Crawford January 14, 2020 at 1:23 am

    Great video. Very detailed. Both of you are so amazing.

  • Reply marxtr6 January 14, 2020 at 1:26 am

    What an incredible transformation. Canโ€™t wait to get the mast up and set her in the water where she belongs. Good job you two. You must be very proud of yourselves.

  • Reply Shaun Oakes January 14, 2020 at 1:26 am

    Great job guy's …… looks better than new !!!!!!

  • Reply Recon Brad Vaughn January 14, 2020 at 1:27 am

    You guy have done so much In Really a short amount of time very impressed with your work this boat you will no it very well it will be so helpful for when things Breakdown it will to be easy fix for you both this is I think the best way to get into Sailing or boating .like I always say thumbs up always.

  • Reply Shirley Baker-Jones January 14, 2020 at 1:28 am

    Looks really really nice. ๐Ÿ˜€

  • Reply tartansailor January 14, 2020 at 1:31 am

    You did a very good job and it is a nice boat. Congratulations, Richard

  • Reply Robert Wambold January 14, 2020 at 1:35 am

    I'm sitting here watching this video while you talk about it being 38 C outside. Right now it's -29 C outside here, I'm a little jealous.

  • Reply Joseph Durand January 14, 2020 at 1:37 am

    When you said 47 degrees. I thought dam thatโ€™s close to the temperature here.except put a minus in front of it. -37 C and thatโ€™s our temperature.

  • Reply Raรบl Leรณn Hallo January 14, 2020 at 1:39 am

    Great job with the hatchet and hope you get better soon

  • Reply Carolina Latour January 14, 2020 at 1:40 am

    Buenas noches o buenos dias, jajaja me encantan sus videos, los espero cada lunes!!! lamento mucho que lastimaras tu pie, espero te mejores pronto y estos 15 dias pasen rapido, me encanta lo que hacen es genial …

  • Reply JL3 Trรฉpanier January 14, 2020 at 1:41 am

    You two have done a really good job. Hi from Montrรฉal, QC, Canada. ๐Ÿ™‚

  • Reply Ricardo Aviles January 14, 2020 at 1:42 am

    great job guys!

  • Reply Jerry Smith January 14, 2020 at 1:43 am

    I so enjoy your videos. After watching your videos I am always ready for another one. Do you have your new mast on order? Also do you intend to replace the navigation electronics? Be safe. If I knew how to add hearts I would give you some. Grandpa

  • Reply mark cortes January 14, 2020 at 1:45 am

    Oh my god guys. That is an amazing job. It looks awesome. Well done

  • Reply gregory h January 14, 2020 at 1:47 am

    Odd Life. Great work on your sailboat the window look great are you going to make it Rain to see if they leak? Take Care you two and how the boat list doing? How the Mast and sails coming a long? Be safe and stay safe.

  • Reply Scott Rowlison January 14, 2020 at 1:47 am

    Great and informative video!!! By a beautiful couple!

  • Reply Mr69Charlie January 14, 2020 at 1:49 am

    Beautiful work!!! What a change. Keep at it you are getting close to sailing in your beautiful sailboat.

  • Reply Greg Hudson January 14, 2020 at 1:53 am

    We ALL look forward to Monday's…!! You are doing an amazing job on your boat, such a lovely couple….! ๐Ÿ‘ซ
    Best love from UK ๐Ÿ‡ฌ๐Ÿ‡ง ๐Ÿ‘๐Ÿป ๐Ÿ˜

  • Reply Mike Skelly January 14, 2020 at 1:56 am

    For 'chasing threads' I use a reversible drill. It also works well to make new threads in soft material like aluminum and plastics…

  • Reply Paul Martin January 14, 2020 at 2:00 am

    As usual very entertaning . Love form England xx

  • Reply Maria Lina Keil January 14, 2020 at 2:01 am

    Parabรฉns, vocรชs podem ficar orgulhosos,por este trabalho tรฃo bem feito e com muito carinho.O convรฉs ,ficou magnรญfico.Que bom que vocรช Roberto, estรก melhor com seu tornozelo.Teve muita sorte!!Uma boa semana,um grande abraรงo de sua amiga, beijos ๐Ÿ˜˜โ™ฅ๏ธโ›ต๐Ÿ‘Œ

  • Reply Peter Bryan January 14, 2020 at 2:01 am

    That looks so nice, just like a new boat.

  • Reply Maria Lina Keil January 14, 2020 at 2:04 am

    Desculpa รฉ o Duca que teve o acidente!!!!!๐Ÿ˜Š๐Ÿ˜Š๐Ÿ˜Š

  • Reply Splitchest 95 January 14, 2020 at 2:04 am

    Didn't need to watch this video because you could head the excitement in Roberta voice! But then to see her smiling and all happy was great. Duca walk softly and heal quickly, the boat needs you, well Roberta probably does too.

  • Reply Garden Railroading Join The Fun January 14, 2020 at 2:13 am

    You two are great

  • Reply Eric Ellithorpe January 14, 2020 at 2:14 am

    Nice Job!

  • Reply Stu Lynn January 14, 2020 at 2:16 am

    ๐Ÿ™‚ so fun to watch you

  • Reply Chris Krebs January 14, 2020 at 2:17 am

    Beautiful Beautiful!!!!! Your hard work is very evident.
    Keep forging ahead.

  • Reply Vicente Perez January 14, 2020 at 2:20 am

    ual…ficou top…parabรฉns.

  • Reply Brian Esposito January 14, 2020 at 2:21 am

    The boat looks brand new!!

  • Reply Damien Doyle January 14, 2020 at 2:25 am

    Fantastic job Guys. With all those hatch screws I wondered why you didn't use an electric screwdriver!! Looking forward to next Monday.

  • Reply Terry Smith January 14, 2020 at 2:26 am

    Looking good u2

  • Reply JR January 14, 2020 at 2:30 am

    I knew you guys could do it. Congrats

  • Reply dtwalker79 January 14, 2020 at 2:35 am

    Looking amazing! Canโ€™t wait to see that sunset through the portholes.

  • Reply rbnhood39 January 14, 2020 at 2:38 am

    Another step closer you guys.

  • Reply Paul Woods January 14, 2020 at 2:39 am

    The deck looks beautiful, sorry to see your injury Duca. It looked a bit dangerous for you to be walking around on the deck – what happened to your guard rail/ stanchions?

  • Reply Douglas Miller January 14, 2020 at 2:42 am

    Deck looks really cool with the tinted glass and the white paint.

  • Reply Gerald Rundall January 14, 2020 at 2:42 am

    Great work thanks for sharing keep them coming

  • Reply trongod2000 January 14, 2020 at 2:43 am

    She looks beautiful!… And so does the boat. ;?)

  • Reply Richard Clair January 14, 2020 at 2:47 am

    Love watching you two..
    Thanks!

  • Reply Jetwash ! January 14, 2020 at 2:55 am

    Your boat is beautiful, you two have done an Amazing job! ๐Ÿ‘๐Ÿ‘ I am looking forward to the video where you splash it for the first time! Keep up the great work, soon you will be sailing to amazing places.

  • Reply skip luck January 14, 2020 at 2:59 am

    Great let's get it in the water time for fun

  • Reply john bellison January 14, 2020 at 3:03 am

    You have been SO entertaining and interesting all the way through this project, I always look forward to Mondays. BUT. These bloody hatches!! Too much detail, seemed like no end in sight. How you kept your patience and didn't throw all that glue, primer, rubber, and each other, overboard, is a mystery on a par with the Oak Island treasure hunters when it comes to mind numbing boredom!!
    Now please get drunk, steal a policeman's hat, or argue with Little Miss Greta, anything to become normal again.
    The rest of us have live in the shadow of your achievements. Please don't mention hatches again this month!
    But 10/10, still my favourite channel. Thanks.

  • Reply amso 9 January 14, 2020 at 3:05 am

    Now hatches are done, finally, what is next?

  • Reply att0987654321 January 14, 2020 at 3:05 am

    I bet you guys are glad that job is finished ๐Ÿ‘๐Ÿป

  • Reply Melinda Mosbey January 14, 2020 at 3:07 am

    Absolutely beautiful as you two are too! ๐Ÿ’•

  • Reply apple butter January 14, 2020 at 3:12 am

    It looks amazing!!!

  • Reply Lingerffxi January 14, 2020 at 3:28 am

    I don't know if this is the same language as you guys speak, but it is a great song about the sea. There is a translation video that I watch. https://youtu.be/PoZH-0xgKwk

  • Reply Champs Visions 3D January 14, 2020 at 3:31 am

    too short ๐Ÿ™‚ those hatch look great! get those thank done and holes fix in the hull. I want to see it float ๐Ÿ™‚ did you make a goal for this month? like tank ready to get fuel?

  • Reply Mary Elias January 14, 2020 at 3:35 am

    Your boat looks beautiful!!

  • Reply Lemuel Casillas January 14, 2020 at 3:42 am

    Felicidades ๐Ÿพ๐ŸŽˆ๐ŸŽ‰

  • Reply Bulletz 4die January 14, 2020 at 3:45 am

    Speake in portuguese pls

  • Reply Daryl Stokes January 14, 2020 at 3:46 am

    I think it takes 20 steps to do one hatch. My brain can only handle 19 steps :/
    You guys amaze me.

  • Reply atmm89 January 14, 2020 at 3:47 am

    use a blower, battery operated are good

  • Reply Allan Gall January 14, 2020 at 3:54 am

    Looking Good !!

  • Reply Greg Bird January 14, 2020 at 3:58 am

    Looks brilliant!

  • Reply 23Prospero37 January 14, 2020 at 4:07 am

    So happy for you two and glad Duca is recovering.

  • Reply Robert Napier January 14, 2020 at 4:18 am

    I'd call that a milestone. Nicely done!

  • Reply Carlos Sanchez January 14, 2020 at 4:18 am

    Estoy muy orgulloso de Ustedes VERY PROUD

  • Reply Ros Kahuna January 14, 2020 at 4:19 am

    How long do you think it might take you to get her into the water? The true test of seeing if everything works and what needs fixing…but as long as she's water tight! Good luck and hope you're sailing soon!!

  • Reply launchedsquid January 14, 2020 at 4:21 am

    you guys are an inspiration, and you're going to have a beautiful yacht when your done, the best bit, you'll have the satisfaction of knowing you did the work, so when someone compliments the look of your yacht, they're complimenting your hard work.

  • Reply Bruce McCulloch January 14, 2020 at 4:25 am

    You two are just too damn cute…stop it….STOP IT ALREADY!

  • Reply Wilkeather January 14, 2020 at 4:27 am

    The deck and hatches look fantastic. Congratulations. Stay safe. Take care of that ankle.

  • Reply Mark Corboy January 14, 2020 at 4:32 am

    The boat is looking sexy.l think the first scratch will have tears in ones eyes

  • Reply Mark Filaroski January 14, 2020 at 4:43 am

    Yay! congrats Y'all! What a great accomplishment!

  • Reply mindworks53ify January 14, 2020 at 4:51 am

    I'm really happy to see you are getting better. From all the things you have done and talked about I don't recall you'd ever mentioned or said anything about when are you going to work on the guard rails around the deck. Where are they? Love you guys!!!!!

  • Reply David Harlem January 14, 2020 at 4:53 am

    Fantastic work – very professional. You two are amazing together. You are not alone – I am wearing one of those boots for six weeks – broken ๐Ÿ™

  • Reply Austin L. January 14, 2020 at 4:58 am

    WOW ! That looks amazing ! Great work !

  • Reply Cody Crawford January 14, 2020 at 5:01 am

    the boat looks brand new good job guys

  • Reply Tomas Kohoutek January 14, 2020 at 5:04 am

    Duca…why do you say ",but…" in each sentence?

  • Reply John Dixon January 14, 2020 at 5:07 am

    The boat is really taking shape. It looks like a brand new boat. Congratulations on all the hard work.

  • Reply Phil Quin January 14, 2020 at 5:14 am

    Looks fantastic, well done. Stainless would be winches and capstains. Enjoy watching your show, thank you for sharing.

  • Reply Rob P January 14, 2020 at 5:16 am

    Rapidly going from crusty boat to beautiful yacht! Great job!

  • Reply Eddie Cox January 14, 2020 at 5:16 am

    Nice job

  • Reply Bill Hatton January 14, 2020 at 5:27 am

    You are doing a very good job. You need a cordless drill though. LOL

  • Reply Jason Osborne January 14, 2020 at 5:36 am

    I love your energy and consistent, steady work! Great job on the hatches. You have inspired me to re-bed my hatches and taught me some great tricks. Keep up the great episodes. Thank you!!

  • Reply john ekins January 14, 2020 at 5:43 am

    Why don't you use a power screwdriver?

  • Reply Droumreague January 14, 2020 at 5:43 am

    ๐Ÿ‡ฎ๐Ÿ‡ช๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘ you are so lucky 38.oC the temperature here in Ireland today is 7.oC โ„๏ธ๐Ÿ’จ

  • Reply mario grech January 14, 2020 at 6:03 am

    well done what a great job you are doing

  • Reply Richard Ford January 14, 2020 at 6:16 am

    Love your work I hoppe you have a great time on the boat , love your moon boot . Cheers from AUSTRALIA

  • Reply G. Mendoza January 14, 2020 at 6:19 am

    Great job guys ๐Ÿ‘๐Ÿ˜€๐Ÿ‘

  • Reply Jose Carlos Campelo January 14, 2020 at 6:36 am

    Mais uma etapa vencida, logo vai ser a vez do tanque de diesel.

  • Reply Greg Johnson January 14, 2020 at 6:41 am

    Just one question? When are you going to start on my room? ๐Ÿค‘๐Ÿค—๐Ÿค—๐Ÿค”๐Ÿ‘

  • Reply Peter Bodifรฉe January 14, 2020 at 6:54 am

    โ€œStop dreaming, keep workingโ€ ๐Ÿ˜‚

  • Reply Simon Benson January 14, 2020 at 6:57 am

    Washing the deck… ah now you've started it never ends!

  • Reply Marcus Butzin January 14, 2020 at 6:59 am

    Cover the boat before you leave! Get a big blue tarp! Use bungee cords, that dust gets inside!!!

  • Reply Miriam Oquendo January 14, 2020 at 7:01 am

    It looks absolutely amazing! You both are masters.

  • Reply Marcus Butzin January 14, 2020 at 7:10 am

    You must "Nurse" him later tonight at home!

  • Reply John Price January 14, 2020 at 7:20 am

    One of you two can't swim. I'm sure of it.

  • Reply Andrew Bergin January 14, 2020 at 7:38 am

    Hi you guys One more thing off the bucket list! Love you're work and vlogs Australia

  • Reply massimo donnamaria January 14, 2020 at 7:57 am

    why didn't use a screwdriver drill?

  • Reply Dennis Banfill January 14, 2020 at 8:30 am

    You guys get it done.Love watching .๐Ÿ‘

  • Reply Norton Ferrari January 14, 2020 at 8:31 am

    You two are so inspiring! Great good energy been used on your boat, no way to be less than awesome when itโ€™s ready for sail! Keep no focus and be happy. Good luck!

  • Reply Brian W. January 14, 2020 at 8:41 am

    Hey guys just a question re positioning of the hatches
    I notice they open from the front of the boat………..I was thinking if they opened from the stern they could be open when your in motion without the chance of water ingress while allowing ventilation.
    I can only assume they can only fit one way rather then being equilateral.
    Oh another question ……how are the sails? Or are you using new ones?
    Iโ€™m enjoying your adventure thank you again for sharing your lives๐Ÿ™Œ๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ

  • Reply Johnbouy Mac January 14, 2020 at 8:51 am

    You guys are a great team – love your videos but I am just going to help you with the correct English names for the parts of your yacht. The first one is your "entry door" this is called the companion way and portholes are usually round whereas portlights are usually oblong or square. Keep up the good work.

  • Reply Dimitris Dim January 14, 2020 at 9:10 am

    ๐Ÿค• ๐Ÿ˜ž๐Ÿ˜ž๐Ÿ˜ž๐Ÿ˜ž๐Ÿ˜ž๐Ÿ˜ž a speedy recovery๐Ÿ’

  • Reply Jeffy2n January 14, 2020 at 9:36 am

    Q: Those top hatch's, did you install them backwards? The way you have them, it would "scoop" the air underway, but all the spray would be scooped into the boat as well. I think I would have put then on with the hing facing forward.

  • Reply David Carr January 14, 2020 at 9:45 am

    Your boat Looks great , you both have done such a great job making the boat your own . Keep up good work .

  • Reply Edward Massengale January 14, 2020 at 9:48 am

    Great progress, thank you.

  • Reply Robert Cole January 14, 2020 at 10:03 am

    Looking like a boat again. Great job guys.

  • Leave a Reply